Online Application Traditional Chinese

FTTS-FA-001 Antibacterial Textiles for General Use
FTTS-FA-002 Antibacterial Textiles for Medical Use
FTTS-FA-003 Electromagnetic Shielding Textiles
FTTS-FA-004 Moisture Transferring and Quick Drying Textiles
FTTS-FA-005 Water-Vapor Permeable and Liquid-Water Impermeable Textiles
FTTS-FA-006 Antifungal Textiles
FTTS-FA-007 Wrinkle Free Textiles
FTTS-FA-008 Ultraviolet Protective Textiles
FTTS-FA-009 Antistatic Textiles
FTTS-FA-010 Far Infrared Textiles
FTTS-FA-011 Water Repellent Textiles
FTTS-FA-012 Oil Repellent Textiles
FTTS-FA-013 Stain Release Textiles
FTTS-FA-015 Flame-Resistant Textiles
FTTS-FA-016 Charcoal Contained Filler Fiber Textiles for Warmth Retention
FTTS-FA-017 Deodorization for Charcoal Contained Filler Textiles
FTTS-FA-018 Deodorized Textiles
FTTS-FA-019 Cool Feeling Textiles
FTTS-FA-020 Liquid Moisture Management Properties of Textile Fabrics
FTTS-FA-023 Generating Heat-Textiles
FTTS-FA-027 Antibacterial Activity
FTTS-GA-024 Cycling Clothing
FTTS-GA-025 Jogging Clothing
FTTS-GA-026 Energy-saving Clothing
FTTS-GA-025 Jogging Clothing

1.     Applicable Scope:

This Standard applies for assessment and test method of basic quality and functional requirement for jogging clothing (see appendix).


2.     Grade Standard:

2.1 Basic quality requirements


Table 1.  Basic quality requirements





Wash durability (1)


Over grade 4



Sweat durability (1)


Over grade 4



Friction durability (1)

Dry friction

Over grade 4

Wet friction

Over grade 3~4


Light durability (1)

Over grade 4


Textile size change (%)

Synthesis fiber and hybrid fabric: -5~+2%

Others: -8~+3%


Seam efficiency (%)

Over 80%


Diffusion ability (diffusion area, mm2)

Over 1500


Drying speed (remaining moisture, %)

Below 13


Moisture absorption- drop (2) (second)


Below 2


Below 5


Moisture absorption - core absorption (mm)

Over 130

Remark (1). The functional color like fluorescence, light reflection or special color decided by the interested parties.

Remark (2). Moisture absorption - the drop method is graded by the averaged value of "no special reflection time".

2.2 Functional requirements

2.2.1Textile air-permeability

        The air-permeability reaches over180mm/sec under the test area20cm2 and pressure 100Pa.


2.2.2UV protection

        The UV protection factor (UPF) for textile reaches over 25 according to CNS 15001 after washed 20 times (in compliance with 2.3).


2.2.3Textile antibacterial

        The antibacterial activity for textile (staphylococcus aureus and streptococcus pneumoniae) reaches over 2.0 according to CNS 20743 after washed 20 times (method and agent in compliance with 2.3 and 3.2 (10) of CNS 14945).


2.2.4Test method for moisture conduction


Table 2. Grade for textile moisture conduction


Upper-layer wet time (sec)

Low-layer moisture absorption (%/sec)

Low-layer diffusion radius (mm)

Low-layer diffusion speed (mm/sec)

One-way conduction index (R)

Moisture absorption

below 5

over 50

over 18

over 3.0

over 400

over 0.60

2.3 Wash Durability

Table 3. Wash durability


General requirement


Wash durability

Wash20 times

(A) The knits conform to 8B in CNS 15140 Table 7 and (2) liquid wash condition in Table 3.

(B) The weaves conform to 6B in CNS 15140 Table 7 and (2) liquid wash condition in Table 3.

   Remark: The wash durability not only includes wash 20 times, but also can be decided by the interested parties.


3. Test Method:

    3.1 Test method for wash durability: In compliance with A-2 of CNS 1494.

    3.2 Test method for dirt durability: In compliance with CNS 1496.

    3.3 Test method for scratch durability: In compliance with Type I of CNS 1499.

    3.4 Test method for light durability: In compliance with method A of CNS 3846.

    3.5 Test method for textile size change: In compliance with CNS13752Gand CNS8038Gfor the knits and the weaves.

    3.6 Seam efficiency: The seam efficiency is calculated according to the following formula after the strength is tested in compliance with 6.2 Test method for seam efficiency of CNS 15538 and 6.2 Breakage method of CNS 8150.

         Seam efficiency = Strength after seam/Original strength x 100%

3.7 Test of textile moisture diffusion: In compliance with 4.1 to 4.3 of CNS 15659-1.

   3.8 Test of textile moisture drying: In compliance with 4.1, 4.2 and 4.4 of CNS 15659-1.

   3.9 Test of textile moisture absorption - drop absorption: In compliance with 4.5 of CNS 15659-1.

   3.10 Test of textile moisture absorption - core absorption: In compliance with 4.6 of CNS 15659-1.

   3.11 Test method for textile air-permeability: In compliance with CNS 5612.

   3.12 Assessment of UV protection textiles: In compliance with CNS 15001.               

3.13 Test method for textile antibacterial: In compliance with 8.1 Absorption method in ISO 20743.

3.14 Test method for moisture conduction:  In compliance with5.4 inCNS 15659-2.


4. Report:

   4.1 Grade of basic quality

   4.2 Grade of functional requirement


5. References:

     CNS 15538      Knitted sport clothing

     CNS 15659-1     Assessment of textile moisture absorption - Part 1: Combination test method

     CNS 15659-2     Assessment of textile moisture absorption - Part 2: Test method for moisture conduction

     CNS 5612       Test method for textile air-permeability

     GB/T 21980      Specified standard of sport clothing and protection utility

     CNS 15001      Assessment of UV protection textiles

     ISO 20743       Textile - 8.1 Absorption method for determination of antibacterial activity of textile products

     CNS 14945      Assessment of general-purpose antibacterial textiles


6. Appendix

  This Standard is reviewed by the Specified Requirement Execution Team, and issued after approved by the Committee Director. The same procedures are applied when revised.



HomeAbout UsTextile SearchCertificationNewsEventsdownloadsFAQLinksContact Us
Address:13F,TTFBuilding, 22 AiGuo East RoadTaipei 100, Taiwan, R.O.C.Taiwan Textile Federation. All Rights Reserved.